Search Results

Silver Lake Water & Sewer District provides utility service to over 56,000 customers in the Bothell, Washington region since 1934. Contact Us Board of Commissioners Meetings Held on the 2nd and 4th Thursdays each month Silver Lake Water & Sewer District welcomes the public to attend and comment at our Board of Commissioners meetings, held on the second and fourth Thursdays of each month at 5:30 p.m. Currently, these meetings are being held in a hybrid format (in-person and virtually). If you would like to attend in person, please contact us at (425) 337-3647 for more information. If you would like to attend by phone, please use the conference information below: Telephone Number: 206-412-5430 Conference ID: 139 743 938# Next Scheduled Meeting: Regular Meeting - Thursday, March 13, 2025 at 5:30 p.m. View Agenda View Archived Minutes Read Our Newsletter The District publishes two newsletters a year: Spring/Summer, and Fall/Winter. View Our Newsletters News Archive Notice of Public Hearing On Communications Site Use and Easement Agreement Thursday, November 14, 2024 Starting at 5:30 pm NOTICE IS HEREBY GIVEN that the Board of Commissioners of the Silver Lake Water and Sewer District will hold a Public Hearing at 5:30 p.m., or as soon thereafter as can be heard on Thursday, November 14, 2024, to consider approval and adoption of a resolution authorizing the District to enter into two Communications Site Use and Easement Agreements (Easement Agreements). There is an opportunity for in-person participation; however, the public is encouraged to attend and provide comment via teleconference. Telephone Number: 206-412-5430 Conference ID: 650 069 747# Notice Is your garden hose making your household water funky? During the summer, the most common cause of water taste or odor complaints we receive is a pressurized garden hose that has backflowed into the home’s plumbing system. Here are some tips to help you with this issue: Disconnect the hose and run cold water from your faucet for a few minutes to flush the pipes. Need a sip of water on a hot day? Get it from your internal sources (sink or refrigerator) instead of a garden-variety garden hose which aren’t manufactured for delivering potable (drinking) water. If the taste or odor is still present after detaching the garden hose from external spigots and flushing your pipes, give us a call at 425-337-3647. Solar Power Coming to District Headquarters Department of Commerce grant funding successful In 2022, District staff applied for the Washington State Department of Commerce Solar Retrofit Grant and were successful in acquiring $75,000 in funding to put towards installing 100 kW of solar power at the District Headquarters. In total, the state grant awarded $1.4 million to 14 different projects, adding over 1 MW of power generation to public buildings. There have been significant changes to the project since the conception, including the possibility of receiving an additional rebate of the project cost via new Federal Government legislation. According to preliminary proposals, the estimated project cost will be $325,930, including $30,000 of contingency funding and $75,000 awarded by the Commerce Grant. The federal rebate may amount to an additional 40% reduction in the District’s costs. The District expects installation work to start in possibly March or April of this year, with construction taking less than a month. When complete, a 100 kW AC solar roof array will offset approximately 1/3 of our Headquarters building's electricity consumption. More information about the awardees and program can be found here. Notice of Public Hearing to Discuss Rate Change Thursday, April 25th Starting at 5:30 pm NOTICE IS HEREBY GIVEN that the Board of Commissioners of the Silver Lake Water and Sewer District will hold a Public Hearing at 5:30 p.m., or as soon thereafter as can be heard on Thursday, April 25, 2024, for the purpose of accepting public testimony of the proposed adjustments to the rates for water and sewer service. There is an opportunity for in-person participation; however, the public is encouraged to attend and provide comment via teleconference. The public is invited to attend the Public Hearing and address the Board of Commissioners regarding the proposed adjustment either in-person or by teleconference. The meeting will be held at the District Headquarters, at 15205-41st Avenue SE, Bothell, WA 98012. At the close of the Public Hearing, the Board of Commissioners will consider adopting a Resolution to increase rates for water and sewer service. Telephone Number: 206-412-5430 Conference ID: 838 103 201# Notice

Silver Lake Water & Sewer District provides utility service to over 56,000 customers in the Bothell, Washington region since 1934. If you have a water or sewer emergency, call us at (425) 337-3647 Welcome to Bienvenido a Water & Sewer District Serving nearly 50,000 people in the Bothell, Washington region since 1934 Attend a Public Meeting Pay Online Now About Your Bill Customer Assistance Forms & Documents Contact The District News & Announcements Upcoming Board of Commissioners Meeting Next Meeting: Regular Meeting Thursday, March 13th Starting at 5:30 p.m. Learn More Lead Service Line Inventory Published The District's inventory is complete, we are pleased to report that no lead service lines were discovered in completing the inventory. Learn More News Archive Our Mission Se necesitan trabajadores de mantenimiento de temporada para unirse a nuestro equipo. As our service area grows, we are continually making investments in our infrastructure to ensure an adequate supply of water is readily available to meet the needs of all customers. About Your Service About Us

Silver Lake Water & Sewer District provides utility service to over 56,000 customers in the Bothell, Washington region since 1934. Contact Us Choose your category and click on a link. Can't find the information you're seeking? Give us a call at (425) 337-3647 Water Conservation Tips Water Conservation Kits Lawn Watering Calendar for 2024 (English) Lawn Watering Calendar for 2024 (Spanish) Our Water Use Efficiency Program Water Conservation Tips All Year Long Toilets are the #1 cause of undetected water leaks in the home (and resulting high water bills)—a leaky toilet wastes between 30 and 200 gallons of water per day! Replace worn toilet flappers, and consider replacing old toilets with water-saving newer models. Learn more Faucets are the second most common cause of water leaks. Replace rubber washers and gaskets in your faucets, hoses and shower heads. Learn more Take showers instead of baths: a 4-5 minute shower uses roughly 10 gallons of water compared to up to 50 gallons for a bath. Take shorter showers: every minute is 2.5 gallons! Install energy efficient shower heads, toilets, and faucet nozzles. Turn off the tap while shaving or brushing teeth. Fix leaky faucets, hose bibs, sprinkler heads, and toilet flappers. Wash large loads of laundry and wait until your dishwasher is full to run it. If you've only got a few dirty plates or you're in a small household where it's not practical to wait until the dishwasher's full, you're better off washing in the sink. Just remember to turn off the water while you're scrubbing. When changing out your pet's water dish or draining the aquarium to clean, use the old water on house plants. Pay close attention to your containers: unglazed terra cotta clay containers are beautiful, but they dry out quickly. Wherever possible, choose glazed ceramic, plastic, or other hard-material pots. During Summer's Peak Usage / Higher Rates Check irrigation systems for freeze damage, broken parts, and slow leaks (this tip can save schools and other municipal facilities thousands of dollars every year!) Unusually damp or green patches of grass are usually the first sign of a leak. Inspect your irrigation system for leaks and breaks at least once a month while it is being used. Water early or late in the day to reduce evaporation. Avoid watering in the head of the day and/or when it's windy. Apply water to the roots, not the foliage: Watering the roots reduces evaporation and the risk of plant disease. Using tools that direct water to the roots—like a water wand or a drip irrigation system—will help keep water where it is most useful. Water outdoor plants twice a week; apply directly by hand. Install drip irrigation for maximum watering efficiency. Apply a layer of mulch around plants to help retain water. Let your lawn go dormant: water deeply once a month to keep roots alive. Use a broom or ShopVac rather than a hose to clean sidewalks, driveways and patios, rather than hosing them down—this can save up to 150 gallons each time! Save pressure washing jobs until Fall rains return. Wash cars less often, at locations that recycle water. Turn off your garden hose at the faucet, not at the nozzle (nozzles are notorious for slow leaks). Water Conservation Components Silver Lake Water & Sewer District offers limited quantities of the following water conservation components to our customers.These items can help you manage your water usage, especially during the summer. All pieces install very easily with few tools required. Just call us to make sure we have them in stock before you come pick up! (425) 337-3647 Residential Showerhead & Faucet Kit One Low-Flow Showerhead Two Bathroom Faucet Aerators Teflon tape Outdoor Watering Components Toilet Leak Detection Kit

Silver Lake Water & Sewer District provides utility service to over 56,000 customers in the Bothell, Washington region since 1934. Contact Us 2021 15205 41st Avenue SE Bothell, WA 98012 (425) 337-3647 Hours Monday, Tuesday, Thursday, and Friday 8:00 AM - 4:30 PM Wednesdays 9:00 AM - 4:30 PM Closed Saturday, Sunday, and major holidays In Case of Emergency If you have a water or sewer emergency after hours, call our regular number, then press “1” to hold for an Emergency Operator. (425) 337-3647 Press 1 District staff are on call 24 hours a day, 7 days a week to assist you with water and sewer emergencies. Submit We've received your message and will respond to you shortly! Map

View and download forms for Customers, Developers, and Permitting Contact Us For Customers Authorization for Autopay Authorization for Copy of Statement Low Income Senior Citizen and Disabled Persons Discount Rate Application Claim for Damages Leak Adjustment Credit Application For Developers / Permits Application for Water - Sewer Service As-Built Requirements Availability Requests Developer Extension Application Developer Extension Agreement Developer Extension Assignment Form Developer Extension Plan Preparation Requirements General Notes Hydrant Water Meter Rental Agreement SLWSD Utility Easement Form

Silver Lake Water & Sewer District provides utility service to over 56,000 customers in the Bothell, Washington region since 1934. Contact Us Fall/Winter 2024 Spring/Summer 2024 Fall/Winter 2023 Spring/Summer 2023 Fall/Winter 2022 Spring/Summer 2022 Fall/Winter 2021 Spring/Summer 2021 Fall/Winter 2020 Spring/Summer 2020 Fall/Winter 2019 Spring/Summer 2019 Fall/Winter 2018

Silver Lake Water & Sewer District provides utility service to over 56,000 customers in the Bothell, Washington region since 1934. Contact Us Choose your category and click on a link. Cant find the information you're seeking? Give us a call at (425) 337-3647 Leaky Toilets Leaky Faucets Irrigation Systems Winterization Checklist How to Thaw Frozen Pipes How to Shut Off Your Water What to do if a Pipe Breaks Leak Adjustment Credit Application Leak Adjustment Estimate Calculator Identifying and Fixing Leaky Toilets Do you hear water running in your toilet, even when the tank is full? The fill valve may be faulty. Correcting this problem can save up to 50 gallons of water a day, saving you money on your water bill. Here's how to do it Is your toilet cycling on and off? Does it make an occasional hissing noise? The rubber flapper at the bottom of the tank is not seating properly, causing water to slowly drain from the tank. Adjusting or replacing the flapper will usually fix this problem. Here's how to do it If you're not sure whether your toilet is leaking, it's easy to check for a leak. Click on this link to learn more: How to Detect a Toilet Leak If you need to test your toilet for a leak, we have free non-toxic dye tablet tests (complete with instructions) available for pick-up at our office. Fixing Leaky Faucets A dripping faucet can cause your water bill to be unusually high. While they're usually easily noticed inside the home, outside faucets often go unchecked—because they're not something you see regularly. The same is true of garden hose nozzles, even in the off position, they will often have a slow leak. It's always best to turn off garden hoses at the faucet, rather than relying on the nozzle. Whether it's an inside or outside faucet that's leaking, check out these tips on how to Repair a Faucet Leak to get it fixed. Keeping Irrigation Systems in Check Next to a leaky toilet, your home, business, or school’s irrigation system is often the #1 culprit in high water bills. It's important to inspect and tune up your system at least once a year, using the guidelines below. For a more in-depth explanation of all irrigation systems and their proper tune-up steps, visit this website: http://www.irrigationtutorials.com/faq/tune-up.htm Spray-Type Sprinklers: Remove the nozzle from each head and clean the screen with an old toothbrush. Turn on the sprinklers and look for partially blocked nozzles. If the fan-shaped spray of water is not even and uniform, a grain of sand is likely stuck in the nozzle. Use a plastic or wood tool (like a toothpick) rather than a metal knife blade, because nozzles are easy to scratch, and scratches can ruin the spray pattern. Even better, replace the nozzle. Using the adjustment screw on top of each nozzle, adjust the water direction. If the heads are creating a lot of mist, turn the screw clockwise. After adjusting, make sure the spray still goes all the way to the next sprinkler. Drip Irrigation Systems: Turn on the water and inspect each drip or spray nozzle to locate and replace or repair any that have become dislodged, clogged, or been damaged by rodents. Check your timer regularly and adjust according to the season. At the end of the season, drain the system and store timers in the garage or another area of your home that won't drop below freezing. Rotor-Type Sprinklers: Turn on each valve, one at a time, and carefully inspect your irrigation system. Look for wet spots that could indicate a leaking irrigation pipe. Repair any leaks. Replace the controller battery. Straighten any sprinkler heads that are leaning to the side (leaning heads create dry spots and waste water). Replace any broken or malfunctioning sprinklers with the same brand and model as the other sprinklers on the same valve circuit; note: most manufacturers use different flow rates in their sprinkler heads so it’s important to get the same brand and model. Winterization Checklist Shut Off Water Protect Your Pipes Disconnect and drain all garden hoses. Insulate exterior pipes and faucets with newspaper, rags, or insulating material, then cover with plastic and secure with string or wire. You can also use electric heat tape. Insulate interior pipes and faucets located in cold areas of your home (including unheated attics, basements, garages and crawl spaces) the same way as Step 2. Locate your home’s main water shut-off valve and test it prior to an emergency, so you can stop excessive water loss and flooding if a pipe breaks. If it's not easily turned by hand, use a wrench to turn it firmly—but gently—in a clockwise direction. Alternatively, you can turn off your water at the meter box by using a “Water Meter Valve Key” tool (shown below; costs roughly $15 at most hardware stores). Locating Your Main Water Shut-Off Valve: This valve is either round or shaped like a lever. It’s usually located in your basement, crawlspace, garage, or outdoor foundation, often near the front faucet. Turn or move it to the right to shut off the main water supply to your house. If you are having difficulties, just give us a call at (425) 337-3647. Additional Safety Measures If you have a yard sprinkler system, drain and blow out the system completely. On extra cold nights, open the doors of closets or cabinets that are located near water pipes on your home’s exterior walls. For maximum protection, apply caulk around incoming pipes, and close or block your home’s foundation vents during the coldest months (open them up once the threat of freezing has passed to prevent dry rot). If you have a second home or cabin that is left unoccupied for several days (or longer)... Turn off the main water shut-off valve. Turn off the electricity or gas to the water heater. If the house is going to be vacant for an extended length of time, the water heater should also be drained. Open and drain indoor and outdoor faucets. After the water is turned off, flush the toilet once to drain the tank but not the bowl. Leave the heat on at a minimum temperature to help keep pipes from freezing in the walls. Thaw Frozen Pipe How to Thaw a Frozen Pipe If you turn on a faucet and only a little trickle (or no water) comes out, your pipe is probably frozen. 1. Locate the suspected frozen area of the pipe—usually where pipes are up against exterior walls, or where your water service enters your home through the foundation. 2. Turn on the faucet closest to the suspected frozen area. This will allow water to flow through the pipe once the frozen area begins to melt, which will help more ice melt inside the pipe. 3. SLOWLY try to thaw the frozen section of pipe. Soak some old rags in hot water and wrap them around the pipe. When the wet rags cool, re-soak them in hot water and continue to apply until water begins to flow again. DO NOT... use an open flame such as a blowtorch, kerosene or propane heater, charcoal stove, candle, or cigarette lighter, as this can cause the water in the frozen pipe to boil and explode the pipe. Open flames also present a serious fire danger, as well as exposure to lethal carbon monoxide. What to Do if a Pipe Breaks IMMEDIATELY turn off the main water shut-off valve to minimize flooding and damage. If you’re unable to turn off your water, call us for help at (425) 337-3647. Our crews are very busy during freeze emergencies, so we may not be able to respond in time to prevent flooding damage...this is why it’s critical that you know the location of your main water shut-off valve (and how to turn it off). It’s also important to keep your water meter unobstructed for easy access. Remember, you are responsible for protecting and repairing the section of water pipes that run from the water meter, all the way into your home.

Silver Lake Water & Sewer District provides water utility service to over 56,000 customers in the Bothell, Washington region since 1934. Contact Us Five Ways to Pay Always include your full 10-digit account number on all methods of payment. NOTE: we do not accept credit cards or bank Electronic Funds Transfer (EFT) payments for new connection fees or other types of invoices from the District. View Rates and Fees AutoPay - Set Up or Cancellation District-Direct AutoP ay is provide d free of charge, and is for customers who want payment of th eir invoices to draw automatically from their bank account on the due date of the invoice. To sign up or cancel , please click here. Pay By Mail Include your account number on your check or money order and mail to: Silver Lak e Water & Sewer District PO Box 3784 Seattle, WA 98124 Deliver In Person (Office or Drop Box) Bring cash, check, money order, credit/debit card to our office during business hours (credit/debit card fee: $4.25); or place a check or money order (no cash) in the drop box in o ur parking lot at: 15205 41st Avenue SE Bothell, WA 98012 Pay By Phone Have your full 10-digit account number ready and call 1-844-956-1375 to use your credit/debit card, or bank Electronic Funds Transfer (E FT) to pay via our third party payment processo r, I nvoice Cloud. The fee for paying by ph one with a credit/debit card is $5.00; the fee for paying by phone using EFT is $ 3.60. Pay Now Online Have your full ten digit account number ready, and use your credit/debit card, or bank E lectronic Funds Transfer (EFT) to pay online via our third party payment processor, Invoice Cloud . The fee for using a credit/debit card is $4.25; the fee for using EFT is $2.85. Rates and Fees 2024 Sewer Rate Adjustments take effect in May Current Water & Sewer Rates Water Connection Fees Sewer Connection Fees - Alderwood Sewer Connection Fees - Everett Other Charges and Fees Comparison of Peer Agency Water and Sewer Rates 2021 Water and Sewer Rate Study by Katy Isaksen & Associates King County Capacity Charge Information

Silver Lake Water & Sewer District provides utility service to over 56,000 customers in the Bothell, Washington region since 1934. Contact Us Can't find the information you're seeking? Give us a call at (425) 337-3647 FAQs DIY Repair Tips Meeting Minutes Customer Assistance Programs Water Conservation Tips Water Quality Forms Backflow and Cross Connection Control Newsletters District Codes District Standards District Resolutions Comprehensive Water Plan Comprehensive Sewer Plan Interlocal Agreements Public Records

Silver Lake Water & Sewer District actively maintains and upgrades your water and sewer infrastructure, as reflected in these recent projects Contact Us 10th Drive SE Water and Sewer Improvements Scope – the District will be replacing 5,000 feet of old cast iron water main on 10th Drive SE with an upsized ductile main, and installing 2,400 feet of new sewer main along portions of the route where it is cost effective to do so Total estimated project cost – $6 million, partially funded by a $2 million low interest loan from the State Public Works Assistance Account Construction schedule – Work will begin in early 2024 and will take approximately nine months to complete More information at 10thDriveWaterandSewer.com Lift Station Improvements A lift station is a pumping facility that moves wastewater from lower elevations to higher elevations. Incorporating lift stations at certain points in a gravity pipeline system is integral to moving sewage to a wastewater treatment plant efficiently and cost-effectively. Silver Lake currently has has 21 sewer lift stations in our wastewater system, several of which are 20 – 30 years old, and coming to the end of their service life with similar maintenance issues. In response, the District is planning to rehabilitate several of these existing lift stations over the next two to three years, and bring another three new lift stations online soon. Below is a summary of each lift station project’s scope, cost, and timeline. If you have questions about these or any of our other projects, give us a call at (425) 337-3647. Lift Station No. 4 Improvements Scope – Replace the original generator for backup power, along with electrical controls and new canopy for weather protection. Total estimated project cost – $600,000 Construction completed Pioneer Trails Lift Station Replacement Scope – Replace an existing station with three submersible pumps, increased capacity, a new backup generator, and electrical control building. The existing 35-foot deep wet well will be converted to overflow storage. Total estimated project cost – $4.1 million Construction schedule – Begin 2023, completion in 2024 Larimer 1 Lift Station Replacement Scope – Replace an existing station with submersible pumps, a new backup generator, and electrical control building. The existing wet well will be converted to overflow storage. Total estimated project cost – $2.8 million Construction schedule – 2024 to 2025 Highlands East Lift Station Rehabilitation Scope – Rehabilitate an existing lift station to accommodate increased flow from new upstream developments. Scope is still TBD but may include replacement of motors and pumps, rehabilitating the wet well, new electrical controls, and site improvements. Total estimated project cost – $1.5 million Construction schedule – 2024 to 2025

Silver Lake Water & Sewer District’s drinking water remains safe and protected from contaminants, including the group of manmade chemicals labeled per- and polyfluoroalkyl (PFAS) substances. Contact Us Silver Lake Water & Sewer District’s drinking water remains safe and protected from contaminants, including the group of manmade chemicals labeled per- and polyfluoroalkyl (PFAS) substances. The District sources its water from the City of Everett. Due to the protected nature of their watershed, which prohibits activities like firefighting training, manufacturing, and agriculture, there are no point sources of PFAS within our source water. What are Perfluoroalkyl substances (PFAS)? PFAS are a group of chemicals that are used widely and are commonly found in things like firefighting foam agents, the manufacture of non-stick materials for cooking (such as Teflon), and fabric protectants. Learn More: Environmental Protection Agency Washington State Dep't. of Health Background and History of PFAS Monitoring In 2016, The Environmental Protection Agency (EPA) released a health advisory for drinking water pertaining to two of the compounds found in the PFAS group: Perfluorooctanoic acid (PFOA) and Perflourooctanesulfonic acid (PFOS). Health advisory levels are non-enforceable guidelines that are intended to protect human health. The health advisory level is 0.07 parts per billion (ppb) for PFOA and PFOS combined. The Washington State Board of Health (WSBOH) recently revised the Group A drinking water rules to require water systems to monitor for select PFAS compounds beginning in 2023. WSBOH established state action levels (SALs) for five selected PFAS compounds as follows: Perfluorooctanoic acid (PFOA) - 0.010 ppb Perfluorooctane sulfonic acid (PFOS) - 0.015 ppb Perfluorononanoic acid (PFNA) - 0.009 ppb Perfluorohexane sulfonic acid (PFHxS) - 0.065 ppb Perfluorobutane sulfonic acid (PFBS) - 0.345 ppb Exceeding a confirmed SAL requires a water system to provide public notification and follow-up monitoring. While exceeding a SAL does not require a water system to treat for the contaminant, the SALs are intended to advise water systems on when to take action to lower contaminant levels to provide for safe, long-term consumption of drinking water. Testing Your Drinking Water for PFAS In 2015, Silver Lake Water & Sewer District participated in monitoring for PFAS in its drinking water under the Unregulated Contaminant Monitoring Rule 3 (UCMR 3). No PFAS compounds were detected in the Districts drinking water as shown in Table 1 below: Table 1: In 2023 through May 2024, the District monitored our drinking water quarterly for an expanded list of PFAS compounds under the EPA’s current Unregulated Contaminant Monitoring Rule (UCMR 5 ) . Once again, no PFAS compounds were detected in the District's drinking water as shown in Table 2 below: Table 2:

Silver Lake Water & Sewer District provides utility service to over 56,000 customers in the Bothell, Washington region since 1934. Contact Us This is not a public disclosure request. Find the public disclosure request form here. To contact District Engineering, please complete the form below. First Name Last Name Email Phone Address Parcel Number Message: Submit We've received your message and will respond to you shortly!